The T2 Clip is an innovative advancement that has evolved from the industry’s most trusted and acclaimed design. By integrating a new, ultra-slim profile that’s 50% thinner, with today’s widest blade opening and exclusive bridge-wire system, the result is unprecedented handling and control with a clearer line of sight for the surgeon.
Ultra-Slim Spring Using cutting-edge technologyavailable exclusively to Mizuho, designers reducedthe already ultra-low Sugita spring profile by 50%,giving surgeons unprecedented ease of handlingand greater visibility of local anatomy.
Delicately Tapered Blade A slim bladedesign with tapered tip allows a smooth approachinto deeper, hard-to-reach surgical sites. The finerblade and distal tip contributes to exposure ofvital surrounding structures.
Widest Opening Available The industry’swidest blade opening provides greater freedomof movement when maneuvering the clip over theaneurysm neck, while the exclusive Sugitabridgewire system prevents twisting.
Atraumatic Blade Impact The channel-shapedpattern uniformly covers the blade’s surface, effectivelywidening the contact area and improving grip force fora strong, consistent hold. Unique design helps ensurevessel safety by reducing slippage and preserving tissueintegrity.
MRI Compatibility T2’s Titanium alloy offersexcellent biological compatibility, durability andwear resistance for permanent implantation.Independent, third-party tests, using FDA andASTM standards, prove T2 Clips to be MR-safeto 4 Tesla.
|A Clip for Every Need To facilitate treatmentof complex aneurysms, the T2 Clip is available ina wide variety of blade shapes, lengths and angles.Clip-Spring colors match appropriate appliers forfast, accurate instrument identification.
Quality you expect. Safety you can trust.
Every Sugita aneurysm clip, including the new T2, embodies Mizuho’s never-ending commitment to product quality and patientsafety. From development and manufacturing through inspection and logistics, clips undergo stringent monitoring and controlto assure optimal reliability and performance.
Blade Holding Force |
| Type Holding force (g) |
| Standard 115 – 185 |
| Standard Temporary 50 – 85 |
| Standard Fenestrated 105 – 165 |
| Mini 105 – 160 |
| Mini Temporary 60 – 85 |
Individual Lot Numbers Lot numbers, laser etched on each clip, permit long-termtraceability throughout the treatment period, and enable detailed clip data to beeasily obtained, should the need arise.
Closing Force Labeling Every clip label lists individual specifications plus clipclosing force. Sugita is the first clip brand to indicate closing force on individualpackages.
NOTE: All clips are packaged and delivered non-sterile. Please sterilize before using.
Innovative Product Configurations
Clip springs and jaw colors are color coordinated to help accurately match clips with their corresponding appliers/removers.
Implant: Standard Series
Closing Force – In accordance with ISO09713, closing force is measured by opening the clip 1.0 mm. A computerized gauge meter measures force 1/3 blade lengthfrom the distal tip. Results are indicated on the clip label in both Newtons and grams.
Implant: Standard and Standard Temporary Series
Implant: Standard Fenestrated Series
Implant: Mini and Mini Temporary Series
Redesigned Clip-Case Simplifies Set Selection.
Mizuho’s modular clip-case system is laser-etched with detailed clip drawings that make it easy to organize, select, sterilize and stock a full surgical set.The system conveniently stores multiple clips per compartment and up to fourteen different appliers.
Four Individually Modular Clip Cases The new T2 Clip sterilization case houses an entire set of aneurysm clips and appliers, with the room to store up to 120 individual clips and 14 different appliers, which fit securely into theall-encompassing lid with soft silicone brackets.
Detailed Drawings for Easy Instrument ID To facilitate selection of the appropriate pattern, individual cases are laseretched with a two-sided clip drawing. Corresponding catalog numbers are also etched inside each cavity for ease of restocking.
Convenient Quick-Access Design Clip Cases are organized by clip type, allowing for quick access to the desiredpattern: Standard/Large Clips Temporary/Mini/Standard Clips Fenestrated Clips Deflected Fenestrated/Long Clips
Low-Profile Appliers and Removers to suit every surgical need
Like our T2 Clips, Mizuho appliers and removers feature a slim, low-profile designfor optimal visibility during placement or removal.
Diverse Instrument Selection Mizuho offers a full variety of appliers to complementT2 Clips. There are Short (70 mm), Standard (90 mm), and Long (110 mm) lengthsavailable, as well as straight and angled shapes. The slim, ultra-light, perfectlybalanced appliers feature meticulously milled jaw grooves to facilitate a sure,no-slip grip and vibration-free release.
Uniquely Color Coded for Safety, Ease of Use T2 Clips are fully compatible withMizuho’s familiar line of Standard and Mini Appliers. By color coordinating the applier’sjaw with the color of the clip spring, the correct applier/clip combination can be verifiedat a glance, ensuring proper instrument selection during surgery.
Ordering Information
Aneurysm Clip Cases | |
| 17-010-50 | Sugita Titanium 2 Clip Sterilization Case (Full set) |
| 17-010-50S | Sugita Titanium 2 Clip Sterilization Case (Standard/Large clips) |
| 17-010-50T | Sugita Titanium 2 Clip Sterilization Case (Mini/Temporary/Standard clips) |
| 17-010-50F | Sugita Titanium 2 Clip Sterilization Case (Fenestrated/Large clips) |
| 17-010-50D | Sugita Titanium 2 Clip Sterilization Case (Defected Fenestrated/Long clips) |
| | |
Mini Clips | |
| 17-001-80 | T2 Mini 5.5 Straight 4mm |
| 17-001-81 | T2 Mini 7.0 Straight 6mm |
| 17-001-83 | T2 Mini 6.5 Curved 5mm |
| 17-001-84 | T2 Mini 7.0 Bent 5mm |
| 17-001-85 | T2 Mini 5.5 Curved 4mm |
| 17-001-86 | T2 Mini 7.5 Sideward Curved 7mm |
| 17-001-87 | T2 Mini 6.0 Curved 5mm |
| 17-001-88 | T2 Mini 7.5 Curved 7mm |
| 17-001-89 | T2 Mini 8.5 Bayonet 5mm |
| 17-001-95 | T2 Mini 5.5 Straight Slim Tip 4mm |
| 17-001-96 | T2 Mini 7.0 Straight Slim Tip 6mm |
| 17-001-97 | T2 Mini 7.0 Curved Slim Tip 6.7mm |
| 17-001-98 | T2 Mini 8.0 Curved Slim Tip 8.2mm |
| 17-001-99 | T2 Mini 6.5 Curved Slim Tip 5.2mm |
| 17-002-15 | T2 Mini 8.0 Straight 8mm |
| 17-002-16 | T2 Mini 7.0 Curved 6.5mm |
| 17-002-17 | T2 Mini 6.5 Slightly Curved 5.5mm |
| 17-002-18 | T2 Mini 7.0 Slightly Curved 6.5mm |
| 17-002-19 | T2 Mini 8.5 Sideward Bent 6mm |
| 17-002-20 | T2 Mini 10.0 Bayonet 7mm |
| 17-002-21 | T2 Mini 6.5 Curved Slim Tip 5.5mm |
| | |
Standard Clips | |
| 17-001-01 | T2 8.5 Straight 7mm |
| 17-001-02 | T2 10.5 Straight 10mm |
| 17-001-03 | T2 11.0 Bayonet 7mm |
| 17-001-04 | T2 9.5 Bent 8mm |
| 17-001-05 | T2 11.0 Sideward Bent 8mm |
| 17-001-06 | T2 10.0 Sideward Curved 9mm |
| 17-001-07 | T2 12.0 Sideward Curved Bayonet 8.5mm |
| 17-001-08 | T2 9.5 Curved 9mm |
| 17-001-09 | T2 10.0 Slightly Curved 9mm |
| 17-001-10 | T2 11.5 Straight 12mm |
| 17-001-11 | T2 13.5 Sideward Bent 12mm |
| 17-001-12 | T2 11.0 Bent 12mm |
| 17-001-13 | T2 13.0 Bayonet 10mm |
| 17-001-14 | T2 14.0 Bayonet 12mm |
| 17-001-15 | T2 13.5 Straight 15mm |
| 17-001-16 | T2 14.0 Slightly Curved Bayonet 12mm |
| 17-001-17 | T2 15.5 Slightly Curved 18mm |
| 17-001-18 | T2 15.5 Straight 18mm |
| 17-001-20 | T2 8.0 L-Shaped 5mm |
| 17-001-21 | T2 8.0 L-Shaped 7.5mm |
| 17-001-22 | T2 8.0 L-Shaped 10.0mm |
| 17-001-23 | T2 9.0 J-Shaped 6mm |
| 17-001-24 | T2 9.0 J-Shaped 7.5 mm |
| 17-001-25 | T2 9.5 J-Shaped 9.0mm |
| 17-001-47 | T2 10.5 45° Angle 5mm |
| 17-001-48 | T2 11.5 45° Angle 7.5mm |
| 17-001-49 | T2 12.5 45° Angle 10mm |
| 17-001-50 | T2 13.0 Curved 14mm |
| 17-001-60 | T2 8.0 L-Shape w/Curve 7.5mm |
| 17-001-61 | T2 8.0 L-Shaped w/Curve 10mm |
| 17-001-62 | T2 9.0 1/4 Curved 7.5mm |
| 17-001-63 | T2 9.5 1/4 Curved 8.6mm |
| 17-001-64 | T2 10.5 Slightly Bent 8mm |
| 17-001-65 | T2 11.0 Slightly Curved 11mm |
| 17-001-66 | T2 11.0 Curved 11mm |
| 17-001-68 | T2 10.0 Slightly Curved 9mm |
| 17-001-69 | T2 9.5 Curved 9mm |
| 17-001-73 | T2 11.0 1/4 Curved 11mm |
| | |
Standard Temporary Clips | |
| 17-001-51 | T2 Temp. 9.0 Straight 7mm |
| 17-001-52 | T2 Temp. 10.5 Straight 10mm |
| 17-001-53 | T2 Temp. 11.5 Bayonet 7mm |
| 17-001-54 | T2 Temp. 9.5 Bent 8mm |
| 17-001-55 | T2 Temp. 11.0 Slightly Curved 11mm |
| | |
Standard Fenestrated Clips | |
| 17-001-26 | T2 11.0 Fen.3.5 Straight 6mm |
| 17-001-27 | T2 13.0 Fen. 3.5 Straight 9mm |
| 17-001-28 | T2 14.5 Fen. 3.5 Straight 12mm |
| 17-001-29 | T2 12.0 Fen. 5.0 Straight 6mm |
| 17-001-30 | T2 14.0 Fen. 5.0 Straight 9mm |
| 17-001-31 | T2 15.5 Fen. 5.0 Straight 12mm |
| 17-001-32 | T2 8.5 Fen. 3.5 Bent 5mm |
| 17-001-33 | T2 9.0 Fen. 3.5 Bent 7.5mm |
| 17-001-34 | T2 10.0 Fen. 3.5 Bent 10mm |
| 17-001-35 | T2 9.5 Fen. 5.0 Bent 5mm |
| 17-001-36 | T2 10.0 Fen. 5.0 Bent 7.5mm |
| 17-001-37 | T2 11.0 Fen. 5.0 Bent 10mm |
| 17-001-38 | T2 7.5 Fen. 3.5 L-Shaped 5mm |
| 17-001-39 | T2 7.5 Fen. 3.5 L-Shaped 7.5mm |
| 17-001-40 | T2 7.5 Fen. 3.5 L-Shaped 10mm |
| 17-001-41 | T2 8.5 Fen. 5.0 L-Shaped 5mm |
| 17-001-42 | T2 8.5 Fen. 5.0 L-Shaped 7.5mm |
| 17-001-43 | T2 8.5 Fen. 5.0 L-Shaped 10mm |
| | |
Mini Temporary Clips | |
| 17-001-56 | T2 Mini Temp. 7.0 Straight 6mm |
| 17-001-57 | T2 Mini Temp. 7.0 Bent 5mm |
| 17-001-58 | T2 Mini Temp. 7.0 Straight Slim Tip 6mm |
| | |
Sugita Titanium 2 Aneurysm
Clip Appliers and Removers | |
| 17-012-52 | Standard Straight 90mm |
| 17-012-54 | Standard 15º Angled 90mm |
| 17-012-55 | Standard 30º Angled 90mm |
| 17-012-56 | Standard Remover Straight 90mm |
| 17-013-52 | Mini Straight 90mm |
| 17-013-54 | Mini 15º Angled 90mm |
| 17-013-55 | Mini 30º Angled 90mm |
| 17-013-56 | Mini Remover Straight 90mm |
| 17-012-51 | Standard Straight 70mm |
| 17-012-53 | Standard Straight 110mm |
| 17-012-57 | Standard Remover 30º Angled 90mm |
| 17-012-58 | Standard Laterally Angled 110mm |
| 17-013-51 | Mini Straight 70mm |
| 17-013-53 | Mini Straight 110mm |
| 17-013-57 | Mini Remover 30º Angled 90mm |
| 17-013-58 | Mini Laterally Angled 110mm |
| 17-001-51 | T2 Temp. 9.0 Straight 7mm |
| 17-001-52 | T2 Temp. 10.5 Straight 10mm |
| 17-001-53 | T2 Temp. 11.5 Bayonet 7mm |
| 17-001-54 | T2 Temp. 9.5 Bent 8mm |
| 17-001-55 | T2 Temp. 11.0 Slightly Curved 11mm |
| 17-001-26 | T2 11.0 Fen.3.5 Straight 6mm |
| 17-001-27 | T2 13.0 Fen. 3.5 Straight 9mm |
| 17-001-28 | T2 14.5 Fen. 3.5 Straight 12mm |
| 17-001-29 | T2 12.0 Fen. 5.0 Straight 6mm |
| 17-001-30 | T2 14.0 Fen. 5.0 Straight 9mm |
| 17-001-31 | T2 15.5 Fen. 5.0 Straight 12mm |
| 17-001-32 | T2 8.5 Fen. 3.5 Bent 5mm |
| 17-001-33 | T2 9.0 Fen. 3.5 Bent 7.5mm |
| 17-001-34 | T2 10.0 Fen. 3.5 Bent 10mm |
| 17-001-35 | T2 9.5 Fen. 5.0 Bent 5mm |
| 17-001-36 | T2 10.0 Fen. 5.0 Bent 7.5mm |
| 17-001-37 | T2 11.0 Fen. 5.0 Bent 10mm |
| 17-001-38 | T2 7.5 Fen. 3.5 L-Shaped 5mm |
| 17-001-39 | T2 7.5 Fen. 3.5 L-Shaped 7.5mm |
| 17-001-40 | T2 7.5 Fen. 3.5 L-Shaped 10mm |
| 17-001-41 | T2 8.5 Fen. 5.0 L-Shaped 5mm |
| 17-001-42 | T2 8.5 Fen. 5.0 L-Shaped 7.5mm |
| 17-001-43 | T2 8.5 Fen. 5.0 L-Shaped 10mm |