Model MST-7200B Microsurgical Table

Model MST-7200B Microsurgical Table

Provides excellent body imaging, precision positioning versatility, and lowers to a height of 16” for microsurgical procedures.

Precision Positioning for Microsurgery

The MST-7200B microsurgical table from Mizuho is engineered with state-of-the-art table design providing excellent body imaging and positioning. The MST-7200B features a low 16” table height for seated surgeons. High and Low Articulation Speeds provide precise positioning.

  • Excellent Body Imaging
  • Full Table Functions
  • 16”(406.4 mm) Low Height
  • Narrow Base Profile
  • Automatic Return-to-Level
  • 500 lb. Weight Capacity
  • 4-Point Self-Leveling
  • Brake System

Model MST-7200B

Durable One-Touch Pendant Control permits precise tableoperation from any point around the perimeter of the table.

Model MST-7200B
Microsurgical Table Specifications


Standard warranty covers parts and labor for two full years.

Installation / Maintenance

Installation supervision is provided. Preventive maintenance and service are available.

In-Service Training

On-site surgical staff training is provided by your local Mizuho representative.

Electrical Specifications

Power requirements: 120V, 60Hz, 450 Watts Current leakage: Less than 100 micro amps Power cord: 15’ with hospital grade connector

Mizuho Model 7200B electro-hydraulic, microsurgicaltable shall operate at 120V, 60Hz, 1 phase and be protectedby internal 8 amp fuses. A 15’ power cord with hospital gradeplug shall be provided. The unit is to include a rechargeablebuilt-in battery system fro use in normal or emergencyoperation. Conductive casters shall allow side movementfor ease of cleaning. Unit is to be equipped withstandardized side rails and a four-point, push-button operatedbraking system for safety and stability. A pendant type controlunit shall be operated from any point around the entire perimeterof the table. Positioning capabilities to include: lateral tilt of 25°;Trendelenburg of 45°; reverse Trendelenburg of 20°; back up of90°; back down of 30°; height adjustment range of 40.5”-16”;low speed for microscope interface; return top to level. The headsection is to be adjustable up 60°, down 90°, extendable to 3”and removable. A 6” portion of the two-piece back section isdesigned to be removed or extended Split Leg sections to bepositionable both horizontally and vertically with 45° downward,upward and 90° abduction capabilities.